Short Kit Contents
| Foam wing cores |
| Detailed clear canopy |
| Molded high impact cowl |
| Plywood firewall |
| Formed gun ports & exhausts |
| Landing gear straps, blocks & screws |
| Engine mount |
| Molded belly cooler |
| Plans with step by step instructions |
| Bill of materials for wood needed to build the complete airframe |
| Working with foam guide sheet |
| Retract guide sheet |
|
Test Pilot's Performance Report
(As tested with .40 engine and 4 ch. radio)
| Take off |
Excellent |
| Top speed |
75+ MPH |
| Landing speed w/o Flaps |
25 MPH |
| Straight out flight stability |
Excellent |
| Roll rate |
Excellent |
| Loop stability |
Excellent |
| Inverted flight |
Excellent |
| Control response |
Very good feel |
| Landing approach |
Low sink rate with no tip stall habits |
| Flare out |
Good |
| Landing |
No bad nose over characteristics for a tail dragger |
| Flying experience recommended |
Intermediate |
|